A water dispenser is a device that warms or cools barreled pure water (or mineral water) and makes it convenient for people to drink.
Warm water dispenser
Contains a heating circuit to make the electric heating tube energize and heat up. When the water in the hot tank is heated to the set temperature, the thermostat contact is disconnected and the power of the heating and heating instruction circuit is cut off.
Hot and cold water dispenser
When the semiconductor direct-cooled hot and cold water dispenser is in use, the direct-cooled hot and cold water dispenser provides normal temperature water from the water tank, and the water is supplied in two ways: one way enters the cold bile container, and the cold water is cooled; Out of hot water.
When the compressor starts to run, it sucks back the heat-vaporized refrigerant vapor in the evaporator, compresses it into high-temperature, high-pressure gas, and then treats it with the condenser, capillary throttling and depressurizing, and evaporator to reduce the water temperature Cycle to achieve the purpose of cooling.
Electronic refrigeration is also called semiconductor refrigeration, or temperature-differential electric refrigeration. It uses a PN junction made of special semiconductor materials to form a thermocouple pair, which produces a Peltier effect, a new type of refrigeration method using direct current refrigeration.
Cabinet water dispenser
The cabinet type water dispenser is twice as high as the table top. There is a cabinet under the water dispenser that can hold cups, tea, etc., and has a storage function.
Desktop water dispenser
The desktop water dispenser is relatively short, only half the height of a cabinet water dispenser, there is no cabinet underneath, and there is no storage function.
Water dispenser filter
Removing a small amount of solid particles in the liquid or air can protect the normal operation of the equipment or the cleanliness of the air, so that the liquid reaches a certain degree of cleanliness.
Water dispenser smart seat
It is located between the bucket containing the water and the body where the bucket is placed. The structure is relatively simple, most of which are approximately cylindrical, preventing water from flowing out of the bucket and preventing water from overflowing.